During these extraordinary times our small company is delivering more playhouses than ever. We are very humbled and grateful for the continuing support and thoroughly enjoy all those assembly project stories where everyone pitched in. There have been also requests for sort of an entry level playhouse with a lower price point. So here comes the Skipper. Like it's bigger cousins, Skipper is designed and manufactured based on the same safe playing principles. Safety features include 3 mm Plexiglas windows and factory sanded wood surfaces. The floor, wall and roof material is 5/8" thick chemical-free solid Tongue and Groove wood. Not OSB or particle board which warp and break if exposed to weather. There is no terrace so this model can easily be built on top of any deck as well. Concerned about the assembly? No worries. Even if you are not the designated handyperson of the household, you will certainly look like one after about 4 hours it takes to assemble this playhouse. Do it yourself step-by-step directions come with the kit. Only minimal tools are needed.
NO INTERIOR FINISHING NEEDED
Durable, dense grain and slow grown Nordic Spruce
All nails, screws, fixings are included.
Easy to follow instructions
- Ridge height 5'6"
- Width 5'10"
- Depth 3'8"
- Side wall height 3'10"
- Roof size 7'1" wide x 4'11" deep
- Front roof overhang 14"
- Wall thickness 5/8"
- Floor and roof/ceiling boards thickness 5/8"
- Door 20" wide x 45-1/4" high
- 2 Fixed Plexiglass windows 15" wide x 17-1/4" high
- Roof area 41 SQF
- Roof pitch 29 degrees
- Pallet size 20" high x 48" wide x 72" long
- Pallet weight 400 lbs
- Item weight 345 lbs
Recommended for children 3 years and older.
This Cabin Kit includes all the parts and hardware except the roof shingles and foundation materials.
- FREE SHIPPING TO ALL 48 CONTIGUOUS STATES.
IMPORTANT:: Liftgate service is not included in the Free Shipping Policy. Not sure if you need the Liftgate service? See the Liftgate information here
Write a review
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: